12V Control Box Receiver Mainboard and Accessories for Children's Electric Vehicles RX23

The RX23 12V control box receiver is a replacement mainboard that brings a child's ride-on car or truck back to working order when its original control box fails. It is built to match the original equipment, so the same ride-on keeps running with its existing wiring and layout.

Check the Fit Before You Order

This control box is designed for the RX23-12V model. Before ordering, open the electronics compartment of your ride-on and compare the existing control box with this unit. The shape, connector layout, and red single-sided 7-pin socket should match. Confirm the original model is RX23-12V. The RX23-A12V and other variants are not compatible with this part.

Product Features

• Replacement 12-volt control box receiver mainboard
• Uses the same 7-pin single-sided red socket as the original unit
• Designed to fit RX23-12V ride-on cars and trucks
• Connects directly to the existing wiring with no rewiring required

Specifications

How to Replace the Control Box

• Turn off the ride-on and disconnect the battery.
• Remove the screws securing the old control box and gently pull it out of its housing.
• Check that the 7-pin connector matches the new RX23-12V unit.
• Align the new control box in the compartment and press the connector into place.
• Secure the control box with the original screws, reconnect the battery, and power up.

Pairing the Remote Control

On first power-up, press and hold the middle button on the remote control for 5 to 8 seconds. Watch for the remote's indicator to flash, then start the ride-on. When the light stays solid, pairing is complete.

Keep a Spare on Hand

Electronics can wear out over time. Keeping a spare RX23-12V control box means a breakdown won't end playtime for long.

Shop all Magic Cars® ride on cars →